Uni-Hydro Plate Shear Model 2574

 

The Uni-Hydro Model 2574 Plate Shear is a compact powerhouse that provides our customers with decades of trouble free metal cutting operation. This plate shear is engineered to deliver increasing power throughout the cut with a patented system that utilizes a cylinder that is center mounted on the blade and uses pivot arms to transfer energy to three pressure points. The result is up to a 115% performance gain as the cut finishes. No other competitors shear matches this performance!

Another hallmark of these plate shears of the simplicity of adjustments, a fixed low rake design, quiet hydraulic operation and simple measuring systems for operator productivity.

 

specifications

Model 2574

Metal Shear Capacity 1/4" x 74"
Strokes Per Minute (max) 14
Blade Size 3/4" x 4" x 74"
Blade Cutting Edges 4
Blade Rake 1-3/16" over 74"

Motor 7 1/2 HP, 3 phase, 7 1/2 HP, 1 phase
Hydraulic System Pump 1000 psi
Oil Capacity 10 gallons

Dimensions 107" W x 28" D x 72” H
Deck Height 32"

Weight 6,050 lbs

 

Features

  • Single cylinder design

  • Cylinder is center mounted on the blade and uses pivot arms to transfer energy to three pressure points

  • Independent hydraulic hold-down

  • 36” Front operated manual back gauge, 24” squaring arm

  • Excellent visibility of cut

  • Electric Controls including foot switch

  • Even distribution of energy across the blade avoids “flexing” of the blade

  • No adjustment of blade gap when switching from thin to thick material

  • Fixed Low Rake Blade

  • Built for forklift handling or lifting with overhead eyelet’s


 
GuillotinePower.jpg

Uni-Hydro plate shears utilize a fixed low rake blade in combination with the Uni-Hydro patented mechanical linkage system. This unique combination provides our plate shears a gain in power performance.

 

Plate Shear Models - Model 2551 | Model 2574 | Model 3851 | Model 3896