Uni-Hydro 56 Ton (5624) Ironworker

 

* Shown with optional Slug Type Angle Shear

 

DESCRIPTION:

In building the 5624 Chuck Dvorak took up his own challenge to design a 1/2” x 24” flat bar shear that could achieve virtually perfect shearing, with a blade rake as close to zero degrees as possible. The result was the Uni-Hydro Model 5624, featuring a 2 degree low rake blade and the highest quality shear for any hydraulic ironworker that has ever been produced. No other hydraulic ironworker can match the 5624’s capability of shearing 1/2” x 24” on 2 degrees of rake, with such minimal distortion over 24”. This machine will do great in small fab, farm and sheet metal shops.  

FEATURES:

  • Manual Punch Aligner

  • 9″ Open Throat Punch with 56-ton capability

  • 24″ Bar Shear with Four Sided Blades, with 2 degrees of rake

  • Bar Shear Hold-Down can be Fixed or Adjustable

  • Full Up & Down Stroke Control

  • Built for Forklift Handling

  • Magnetic Starter for Safety & Reliability

  • 1 Phase or 3 Phase Motor

 

56 ton (Model 5624) ironworker Specifications

 

Model 5624
Tonnage 56
Throat Depth 9"
 
Punch
1-3/8" hole in 1/2" mild steel
2-1/4" hole in 5/16" mild steel

Bar Shear
1/2" x 24" 

Angle Shear 90°  
Slug Type - 6" x 6" x 3/8"
Sever Cut - 4" x 4" x 3/8"

Miter Angle 45°  
Bar Shear - 4" x 4" x 3/8"
Slug Type - 4" x 4" x 3/8"

Rod Shear  
Round (Max) - 1-1/4"
Square (Max) - 1-1/4”

V Coper Notcher 90°
For 4" x 4" x 3/8" Angle Iron

Square Notcher  
3" x 3" x 3/8" - Punch/Power Cavity

Pipe Notcher (Sch 40 or 80)
1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4”, 2"

Brake
6", 9”, 14”, 18”, 24” capacity

Channel Shear
2" & 3" combined or 4" standard 

Strokes Per Min  
Light Material - 50
Max Capacity - 9

Hydraulics 2,000 psi
Oil Capacity 16 gallons   

Motor
Standard - 5 HP/ 220v / 3ph
Optional - 5 HP / 1ph

Dimensions
(L x W x H) 46" x 37" x 70"

Bar Shear Work Height - 29"
Punch Table Top Height - 39-1/4"
Cavity Table Top Height - 41"

Weight - 2,700 lbs

Station Tooling Options:

PUNCH, POWER CAVITY, NOTCHING
V-Coper Notcher
V-Coper Notcher

Punch Station - For 3x3x1/4 Angle Iron, Notch V from Middle of Angle or Notch a Square from end

Square Notcher
Square Notcher

Punch Station - For 1/4” thick material, need Model & Serial # for Free Pusher Size 1-1/2 x 2 x 1/4

Pipe Notcher
Pipe Notcher

Punch Station - Specify size required

Slug Type Angle Shear
Slug Type Angle Shear

Makes two cuts at the same time discharging a slug from between the cuts.

Universal Sever Housing
Universal Sever Housing

Each blade is for cutting a different size and type of stock. Angle, Channel, Rod, Z&T

Sever Plates
Sever Plates

Depending on the thickness of the steel and the tonnage required, there is a sever plate available in most shapes and styles.

Sever Housing Back
Sever Housing Back

Removed from the power cavity, the back of the housing is open

2-Part Brake
2-Part Brake

For bending mild steel in the Power Cavity station

Spring Return Brake
Spring Return Brake

Punch Station tooling for bending mild steel.

Optional Accessories:

Optimize Your ironworker for Productivity
Punch Table + Adjustable Jig
Punch Table + Adjustable Jig

Punch tables are impregnated with oil like our punches to keep the area free from rust.

Bar Shear Table
Bar Shear Table

Extends table from 3” to 12”

Steel Bin Catcher
Steel Bin Catcher

Catches drop pieces from the bar shear

Deluxe Back Gauge
Deluxe Back Gauge

For shearing up to 6’ long pieces

Bar Shear Stop
Bar Shear Stop

For shearing up to 24” long pieces

Grease Bank
Grease Bank

For greasing fittings under covers without removing covers

Remote Foot Switch
Remote Foot Switch

For ironworkers up to 50 ton capacity

Oversize Die Stands
Oversize Die Stands

Die Stands for any purpose for any series

Punch Nut Wrenches
Punch Nut Wrenches

Available for all punch nut sizes

Punch Rack
Punch Rack
Oversize Die Stand
Oversize Die Stand

Straight shot oversize die stand

Offset Die Stands
Offset Die Stands

In the front is a S-Series offset die stand and behind it is a L100 Series offset die stand.

Offset L100 Die Stand
Offset L100 Die Stand

This is an offset L100 Series Die Stand

Oversize Punches
Oversize Punches

Oversize Screw On punch next to a 500 Series Punch

SPECIAL DIE STAND
SPECIAL DIE STAND

Special Die Stand with 7x7 Plate Die

 

Uni-Hydro Inc. reserves the right to change specifications and options for machine models at any time without notice. Available options and tooling may vary depending on specific model capacity, all of which are outlined in formal quotes generated by our sales team. Photos of machinery may show optional tooling for marketing purposes.

Connect with Uni-Hydro

Great things are happening with our company and we look forward to keeping you updated about product releases, special offers and informative articles about fabricating with our ironworkers. We understand your time is valuable and promise to be respectful of your inbox. Sign-up for The Uni-Hydro Informer today!