Each blade is for cutting a different size and type of stock. Angle, Channel, Rod, Z&T
V-Coper Notcher
Punch Station - For 3x3x1/4 Angle Iron, Notch V from Middle of Angle or Notch a Square from end
Square Notcher
Punch Station - For 1/4” thick material, need Model & Serial # for Free Pusher Size 1-1/2 x 2 x 1/4
Pipe Notcher
Punch Station - Specify size required
Slug Type Angle Shear
Makes two cuts at the same time discharging a slug from between the cuts.
Universal Sever Housing
Sever Plates
Depending on the thickness of the steel and the tonnage required, there is a sever plate available in most shapes and styles.
Sever Housing Back
Removed from the power cavity, the back of the housing is open
2-Part Brake
For bending mild steel in the Power Cavity station
Spring Return Brake
Punch Station tooling for bending mild steel.
