Punch Station - For 3x3x1/4 Angle Iron, Notch V from Middle of Angle or Notch a Square from end

Punch Station - For 1/4” thick material, need Model & Serial # for Free Pusher Size 1-1/2 x 2 x 1/4

Punch Station - Specify size required

Makes two cuts at the same time discharging a slug from between the cuts.

Each blade is for cutting a different size and type of stock. Angle, Channel, Rod, Z&T

Depending on the thickness of the steel and the tonnage required, there is a sever plate available in most shapes and styles.

Removed from the power cavity, the back of the housing is open

For bending mild steel in the Power Cavity station

Punch Station tooling for bending mild steel.

Punch tables are impregnated with oil like our punches to keep the area free from rust.

Extends table from 3” to 12”

Catches drop pieces from the bar shear

For shearing up to 6’ long pieces

For shearing up to 24” long pieces

For greasing fittings under covers without removing covers

For ironworkers up to 50 ton capacity

Die Stands for any purpose for any series

Available for all punch nut sizes

Straight shot oversize die stand

In the front is a S-Series offset die stand and behind it is a L100 Series offset die stand.

This is an offset L100 Series Die Stand

Oversize Screw On punch next to a 500 Series Punch

Special Die Stand with 7x7 Plate Die